바로가기 메뉴

Products
& Service

СервисКаталогКонтакты

Gas Equipment

 Stainless flexible tubes
Gas line
Water line
Flexible tube(screw type)
Products Detail
 
Helical type corrugated tubes (KS marked item for cold and hot water)
(MODEL-003)
Corrugated tubes, which is approved by UL(USA), RWTUV(Germany) and is certified as quality products with NET, KS(KSD3628) by the Korean government, are supplied in a roll up to 1,200m and used for water plumbing system inside buildings. The corrugation pitch is slightly wider to reduce the fluid resistance and thus generate no vibration or noise. It connects with screw-in-field type of fitting with cone packing (NBR, Silicon, Graphite).
Helical corrugated tubes
Product Specification
MODEL-003
FLEXIBLE
TUBES (HELICAL TYPE)
304,
316L		 Nominal Diameter Thickness O.D.
(mm)		 I.D.
(mm)		 No. of Pitch
(EA/M)		 Length
(m)
Bending Radius
(mm)
Max. Working Pressure
(kgf/cm2)
DN15(1/2") 0.3t 18.0~18.2 13.9~14.1 200+/-1 25~50 30 15
DN20(3/4") 25.6~25.8 21.1~21.3 180+/-1 40 13
DN25(1") 32.6~32.8 27.2~27.4 160+/-1 50 12
DN32
(1 1/4") 		39.5~39.7 34.0~34.2 80 10
DN40
(1 1/2") 		49.5~49.7 42.4~42.6 120
DN50(2") 62.0~62.2 53.3~53.5 145+/-1 150
Fitting for Annular Tube for Solar Heat System, Heat Exchanger,
1. Component
2. Cross-Cut Drawing
3. Material
No Component Material No Component Material
① FLEXIBLE TUBE STS304/316 ④ CONE TYPE PACKING GRAPHITE
SILICONE
N.B.R
② NUT BRASS ⑤ M-SOCKET BRASS
③ CLAMP THREAD RING ZINC ⑥ F-SOCKET BRASS
4. Heat
GRAPHITE SILICONE N.B.R.
℃ 350℃ 150℃ 120℃
℉ 662℉ 302℉ 248℉
CONE PACKING (NBR, SILICONE, GRAPHITE) TYPE FITTING
 
 
 
 
 
 
 
 
Annular Corrugation (KS marked item for cold and hot water) (MODEL-004)
Corrugated tubes, which are approved by UL(USA), RWTUV(Germany) and are certified as quality products with NET, KS(KSD3628) by the Korean government, are supplied in a roll up to 1,200m for easy speedy inexpensive installation. As no connecting point exists on the tubes except both ends of the tube, there is no fear of leakage. The screw-in type connection with NBR, Silicon, or Copper packing doesn’t require any tool for installation.
Annular Corrugation
Product Specification
MODEL-004
Annular
Type
Tubes
(304, 316L)
 
 Nominal Diameter Thickness O.D.(mm) I.D.(mm) No. of Pitch(EA/M) Length(m) Bending Radius(mm) Max. Working Pressure(kgf/cm2)
DN10
(3/8")		 0.2t~0.3t 14.9~15.5 11.3~11.9 237~243
(240+/-3)		 22.86~50 30 12
DN15
(1/2")		 17.7~18.3 13.4~14.0 234~240
(237+/-3)		 10
DN20
(3/4")		 0.25t~0.3t 25.3~25.9 19.7~ 21.3 210~216
(213+/-3)		 40 8
DN25(1") 31.5~32.1 26.5~27.1 193~199
(196+/-3)		 50
Fitting for Annular CSST for Gas.
1. Component
2. Cross-Cut Drawing
3. Material
No. Component Material No. Component Material
① FLEXIBLE TUBE STS304/316 ④ GLOVE PACKING NBR or SILICONE
② NUT BRASS ⑤ M-SOCKET BRASS
③ INSULATION CLAMP RING NYLON66 ⑥ F-SOCKET BRASS
⑦ COATING P.E
GLOVE PACKING TYPE FITTING for DRINKING WATER