|
MODEL NO : WPAV-6115
* REMARK
|
1. You would better test whether pull away valve is normally operated by using dry nitrogen or non-active gas for this test at least once a month.
2. The specification and design are subject to change without notice. |
- Pull away valve was specially designed to protect an unexpected GAS accident which will be happened by broken lorry hoss when loading at tank lorry with Liquid Propane Gas or unloading it.
Pull away valve is installed on lorry hose. It can be separated by excessive power, and then the internal both check valves of Pull away valve can be closed automatically and prevent leakage LP Gas. However may flow out a few of LP Gas when it was separated.
When you are going to set again Pull away valve after operated it, should pull out the inside pressure for safety.
To reset Pull away valve after separated, have to push the male coupling into the female valve closely till reach to the groove of it.
Have to check whether it can be leak LP Gas or not after reset.
- Hydrostatic test pressure : 30 kg/㎠
- Pneumatic test pressure : 22 kg/㎠
- Material : A2024 / STS304 / S45C
| |
|
SIZE |
DIMENSION |
LPG LIQUID FLOW CAPACITY AT VARIOUS
DIFFERENTIAL PRESSURE(M³/hr) |
DISCONNECT
FORCE |
|
A |
B |
C |
L |
0.35kg/㎠ |
0.7kg/㎠ |
1.76kg/㎠ |
3.52kg/㎠ |
|
25A |
PT 1” |
PT 2” |
84 |
166 |
4.77 |
6.81 |
10.67 |
15.22 |
31㎏f |
|
25A |
PT 2” |
PT 2” |
172 |
312 |
56.78 |
79.49 |
124.91 |
170.33 |
45㎏f | |
|
English
Русский
